Wooden Garage Dorset. Mr W was looking for a double timber garage with a metal roof and fully retractable automated up and over doors so this is what we did…..
FINISHED WOODEN GARAGE DORSET
THE BUILD
Our wooden garages are constructed using 100mm x 38mm timber framing clad with tanalith BS8417 shiplap, bitumen paper and 4mm plywood lining. This standard garage, has 300mm overhangs to front and rear with guttering and down pipes. The eaves height on this double garage with standard double doors is 2.3m plus the single engineering brick course, this allows the doors to miss the guttering if barn doors are installed.. The ridge height varies depending on the width of the garage but sits generally around 3.5 metres. We can manufacture the ridge height to be no higher than 2.5m if required to sit within the planning regulations.
This wooden garage has anthracite grey fully retractable automated up and over garage doors and a matching meta roof with a large garage window to the right hand elevation.
The standard covering for the roof is felt tiles or a metal roof with underfelt. Tapco Slate is a popular additional option which will last for 50 years!
One concern for a number of customers is the damp proofing. When the sections are bolted through the single course of bricks into the concrete base the timber clad runs 50mm down the outside of the brick. In addition to this the vapour barrier also runs down the same distance ensuring no rain water can get into the building. One further measure is a DPC is attached to the bottom rail of the section which sits on the top of the brick and stops any moisture in the brick rising up into the timbers.
If you are interested in this design or would like something similar please do not hesitate to contact us for a quotation?
PLEASE CLICK HERE TO VIEW BUILDING RANGE >>
TESTIMONIAL
“Awaiting testimonial”
Mr W – Dorset.