The Winchester Studio Garden Room range is based on a modular design in sections of 1200mm and 600mm by 2134mm high. They range from 3.2m to 6.2m wide and 2.4m to 4.2m deep. The modular design allows you to position the doors and windows were required and are specified at the point of order.
The standard Studio Garden Room is supplied with one set of uPVC French double-glazed doors and a 600mm x 900mm uPVC casement windows, further windows can be added if required and are listed in the ‘Additional Options’ section below.
The Studio Garden Room is manufactured with a pitched roof and comes with either slate grey or red/brown felt tiles. The ridge height is 2.5m high as a standard but can be increased to 3.0m if required. In addition to this the building comes with 3 double sockets, spotlights, a consumer unit and switch. There are also a number of additional electrical options to add to the building if required.
If the standard sizes are not suitable, we can manufacture the offices to suit the size you require. If you have any queries, please do not hesitate to contact us.
The Studio Garden Room is constructed using 1 1/2″ x 3″ (38mm x 75mm) selected framing. The framework is built and clad with 16mm nominal x 125mm tanalised shiplap cladding on the exterior, providing you with a 25-year rot resistant finish.
The interior is lined with 12mm brush grooved plywood, to provide a high quality and attractive finish, with cavity filled 50mm polystyrene insulation. Skirting and appropriate mouldings are also fitted to provide a professional finish.
The floor has a 15mm plywood finish and sits onto 1 1/2″ x 3″ (38mm x 75mm) tanalised floor joists with 75mm Celotex insulation underneath the plywood. A second level of tanalised bearers lifts the floor away from the concrete base to provide the necessary air flow beneath the building.